SANFROS TOOLS DEVELOPMENT CO., LTD.

Inquire Now Add to Inquiry Cart
No. Picture Product Name / Descriptions Select

All Product Listing

1.

Toyota Sub-Frame Bush Installer & Remover (ALTIS)
Model: SFJ-TO128
■ Removal and installation of rear rubber mounts of axle suspension.

■ On car maintenance. Do not need to remove the sub-frame.

■ Applicable: TOYOT... (Read more)

2.

Vario Nut And Cap Key Set, Heavy Duty
Model: SFJ-8828
■ Extra heavy execution

■ For the dismantling and assembly of vario nuts.

■ Suitable for exact torque with a 3/4" square drive.

■ Certain stop thr... (Read more)

3.

Valve Seal Remover and Installer Kit 4Pcs
Model: SFJ-1317
■ Two valve keeper removers and installers operate much quicker than standard compressors.

■ Valve retention tools hold multiple valves in place at ... (Read more)

4.

Puller for C.V Drive Shaft Joints
Model: SFJ-8322S
■ Handling is more safely and simply.

■ It saves more work time.

■ The joints and the surrounding components do not suffer any damage.

■ It is sui... (Read more)

5.

Universal Oil Filter Wrench
Model: SFJ-8317
■ ☐1/2"DR.

■ For all kind of auto oil filter, special removal/ installation.

Features:

■ Four specifications, to correspond for all vehicles.

■ T... (Read more)

6.

Universal Master-Rod Wrench 33~42mm
Model: SFJ-8319
■ ☐1/2"DR.

■ Specifically designed for remove the direction steering rod.

■ Internal serrated design to make tools more closely occlusion.

■ Appli... (Read more)

7.

Universal Master-Rod Wrench 33~42mm
Model: SFJ-8319
■ ☐1/2"DR.

■ Specifically designed for remove the direction steering rod.

■ Internal serrated design to make tools more closely occlusion.

■ Appli... (Read more)

8.

Wheel Bearings toolset 35 PC
Model: SF-C190
■ The assembly and disassembly of the wheel bearing and wheel hub

Remove the unecessary bearings off.

■ Inner diameter: 34, 35, 36, 37, 38, 39, 40,... (Read more)

9.

Slide-Hammer Puller Set For Drive Shaft
Model: SFJ-8322
■ Feature: use the extendable and adjustable steel cable to clip the axle/drive shaft

tightly pull out axle/drive shaft with slide hammer easily.... (Read more)

10.

ADJUSTABLE FUEL TANK LID REMOVAL
Model: SFJ-1212
■ New patented design.

■ Adjustable range: various size of fuel tank cap.

■ There are steel rods on two sides; it can adjust the size to fix with t... (Read more)

11.

Manual Pumping Unit 9 liters
Model: SF-2228
■ Use for replace the new oil.

■ Completely automatic, it could operation by using pneumatics or pumped manually.

■ New safety design, when the tan... (Read more)

12.

Ball-Joint Removal tools
Model: SFJ-1311
■ Car maintenance.

■ This tool is designed to remove the truck ball-joint. the best tool for remove the truck ball-joint.

■ Will not damage to the ... (Read more)

13.

Manual / Pneumatic tubing group
Model: SF-A111
■ Do not force to use it; it may easy to be damaged.

■ Should be placed in a cool, ventilated, dry place, avoid high temperature and direct sunlight... (Read more)

14.

Ball joint removal / install Press and pull sleeve set
Model: SF-U026B
■ Universal tool set for extracting and drawing in: Silent bearings, hydraulic bearings, bearing bushes, ball bearings, shaft seals, rubber bearings,... (Read more)

15.

Universal Bearing Ring Puller
Model: SFJ-9320
■ Universal bearing ring Puller with a rotary system.

■ Three legs with the ultra sharp edge provides an equal gripping tension on all sides to avoi... (Read more)

16.

Supporting Arm For Suspension - Bending angle
Model: SFJ-8323L
■ Designed for pulling down arm, which at the time of raising the car on a lift is pulled up.

■ The device also useful for detecting luzw suspension... (Read more)

17.

Supporting Arm For Suspension
Model: SFJ-8323S
■ Designed for pulling down arm, which at the time of raising the car on a lift is pulled up.

■ The device also useful for detecting luzw suspension... (Read more)

18.

Power bar Hand Impact Wrench 1/2〃DR
Model: SFJ-4628
■ Remove/replace harmonic balancer pulleys without removing the radiator.

■ Access restricted areas where an air impact wrench won't fit or when air... (Read more)

 

Contact Information

Company:SANFROS TOOLS DEVELOPMENT CO., LTD.
Address:495-1 Guoji Rd., Sec. 1, Taoyuan, Taiwan 33061
Telephone:886-3-364-8183, 362-2235
Fax:886-3-362-2671
If you have any needs, please contact us.